Skip to content
Technician arriving at a home with a tool bag, van behind

Common problem

Air Conditioner Error Codes in Clearview

An error code is your air conditioner telling you exactly where it hurts, and Clearview Air Conditioning reads that message for a living. We work across Clearview and greater Adelaide, and we turn that flashing code into a fixed-price repair. Call (08) 8246 6297 and we will book you in.

Technician fitting the wall bracket for a split system indoor unit

What Aircon Error Codes Are Telling You

That code is not random. It is a fault logged by the unit's control board, pointing at a sensor, a fan, a compressor fault or a communication drop between the indoor and outdoor units.

Different makers, different codes. The same letter and number can mean two different faults on two different brands. That is why the brand name matters when you call, and why we carry the service data for the units we install, including Daikin, Mitsubishi Electric, Fujitsu and ActronAir.

Call (08) 8246 6297

Cheap Air Conditioning Causes to Rule Out First

Most codes trace back to one of a short list of causes, and the cheap ones come first.

Dirty filter or coil

Flat remote or control batteries

Tripped breaker or isolator

Full condensate tray

Failed sensor or board

On the older austerity cottages off Kelway Crescent, we still meet units well past a decade old, and those sometimes flash codes for parts that are simply worn out. On the newer infill rebuilds, the fault is more often a sensor or a settings issue than a dying machine.

Call (08) 8246 6297

Safe Aircon Checks Before You Call

A couple of checks rule out the silly causes without touching anything dangerous.

Note the exact code

Power cycle once

Check the filter

Check the breaker

Anything past that involves live electrical parts or refrigerant, and that is licensed work. Stop there and call us.

Do not wait on this

When an Error Code Means an Urgent Air Conditioning Repair

Some codes are urgent. An electrical or compressor fault code, or a unit that cuts out repeatedly on a 40-degree day, should not be run again while you wait. Switch it off at the wall and book a repair.

Our air conditioning repairs team offers a Within-the-Hour Response for urgent issues, where availability allows, and we are reachable 24/7 for emergencies.

Call (08) 8246 6297 now

How it works

How We Find the Fault Behind the Code

Every diagnosis follows the same shape, so nothing gets guessed.

  1. 1

    Code and history

    You tell us the code, the brand and what the unit was doing.

  2. 2

    Onsite diagnosis

    We test the sensors, airflow, power and refrigerant pressures the code points to.

  3. 3

    Fixed quote

    You get the price in writing before any work starts, under our Fixed Upfront Pricing.

  4. 4

    Repair and test

    We fix the fault, clear the code and run the system through a full cycle.

If the fault sits in a ducted air conditioning system rather than a split system, the diagnosis covers the ducts and the controller as well, because a communication fault is not always where the code says it is.

Smiling technician beside an outdoor unit at the side fence

Repairs Backed by Our Guarantees

Every repair carries our Lifetime Labour Warranty, so if the fault traces back to our workmanship, we come back and fix it at no cost. Pensioners get a 10% pensioner discount, and larger jobs can go on Humm interest-free finance.

Call (08) 8246 6297

Questions

Air Conditioning Error Code FAQs

Can I clear an error code by resetting the unit?

Sometimes a power reset clears a one-off glitch, but a code that comes back means a real fault, and repeatedly resetting it can turn a small repair into a bigger one.

Why does the code show on the unit and not the remote?

The indoor board detects most faults, so it flashes the code on the unit or the wall controller, while the remote only shows the settings you have chosen.

Do older units show error codes the same way as new ones?

No, because many units fitted to the post-war cottages around Clearview predate digital codes and blink a light in a pattern instead, which we read from the service data.

What does a repair for a fault code usually cost?

It depends on the part behind the code, so we diagnose on site and give you a fixed quote before any work starts.

Talk to a local

Get That Error Code Sorted in Clearview Today

Ring (08) 8246 6297 with the code and the brand, and we will book a diagnosis, quote the repair fixed and have your air conditioning running again. New customers get $50 off first service, and we take calls 24/7.

Call (08) 8246 6297 Request a fixed quote

$50 off first service for new customers.

Book Now Call now